At the frequency of the circuit, resonance occurs, and the sampled voltage is Q times the output voltage of the excitation transformer's high voltage end. q is the quality factor of the system, that is, the voltage resonance multiple, usually ranging from tens to over 100. The series resonance of the circuit is caused by adjusting the output frequency of the variable frequency power supply, and then adjusting the output voltage of the variable frequency power supply to reach the test value under the condition of circuit resonance. Due to the resonance of the circuit, the smaller the output voltage of the variable frequency power supply, the higher the test voltage generated for the CX sample.
Conduct voltage withstand test using frequency conversion series resonance method. Through multi-level stacking, multiple reactors are used in parallel and in series. Voltage divider is used to measure the test voltage.
The formula for series resonance is as follows:
The imaginary part of the impedance of a circuit is equal to 0. z=r+jx,x=0,z=r . So i=u/z=u/r.
(1) Resonance definition: In a circuit, when one reactive module releases energy, the energy of the two components is equal, and the other reactive module must absorb the same energy. In other words, there will be energy pulsation between the two reactive components.
(2) In order to generate resonance, the circuit must have inductance L and capacitance C.
(3) The corresponding resonant frequency is the resonant frequency (resonance) or resonant frequency represented by FR.
(4) The conditions for a series resonant circuit are as follows: When i2xl=i2xc is xl=xc, the resonance conditions for an r-l-c series circuit are obtained.
(5) Whether in series or parallel resonance, when resonance occurs, complete energy exchange between L and C is achieved, that is, the released magnetic energy is completely converted into electric field energy and stored in the capacitor, while the capacitor discharges at another time and then converts into magnetic energy stored in the inductor.
(6) In a series resonant circuit, due to the same current flowing through series - L and C, energy exchange occurs through changes in voltage polarity; In a parallel circuit, the two ends of C have the same voltage, so energy conversion is the opposite current phase of the two components.
(7) Inductance and capacitance are still two components of resonance, otherwise energy exchange cannot occur; But from the perspective of equivalent impedance, it becomes a component: the resistance value is zero or infinite.





