In this circuit, when the inductive resistance XL and the capacitive resistance XC are equal, the total resistance Z of the circuit XL=XC will be minimized, while the pure active Z=R, the current will be maximized

The voltage drop across inductive and capacitive components is calculated according to Ohm's law

Because the XL=XC voltage value of the ideal inductor U L is equal to the voltage of the U capacitor C. However, the phases of voltage U L and U C are opposite (with a phase shift of 180 °)
![]()
The working mode of a circuit with R, L, and C components connected in series, where XL=XC and UL=UC (or UL=- UC) are called series resonance.
The sum of the complex numbers of stress L L and complex C is zero, therefore the total modulus is zero. A voltmeter, which measures the voltage drop (voltage complex module), will display a value of 0 along with the ideal inductance and capacitance in the circuit section. In this case, when the current I and voltage UVX are consistent, the maximum value of active power p=RI02 is equal to full power, while the value of the reactive power circuit is zero:
![]()
In series resonance, if the voltage across the capacitor and inductor greatly exceeds R, they may greatly exceed the provided voltage U:

The physical reason for the voltage rise is the fluctuation of a large amount of energy stored alternately in the capacitive electric field and magnetic field of the inductive element. Through voltage resonance, a small amount of energy comes from the power source and compensates for the energy loss in the active components - resistance R, which is sufficient to maintain continuous oscillation in a system with relatively large amounts of energy from electric and magnetic fields. Moreover, the total energy of the electric and magnetic fields remains constant at all times.





