Application Of Series Resonant Circuit

Nov 11, 2025 Leave a message

Application of series resonant circuit? Wuhan UHV specializes in the production of series resonance, with a wide range of product selection and professional electrical testing. To find series resonance, choose Wuhan UHV.

 

AC Resonant Test System


According to the requirements of electrical equipment handover tests, AC withstand voltage tests are required for capacitive equipment such as transformers, GIS systems, SF6 circuit breakers, current transformers, power cables, and bushings during handover. When using the traditional power frequency voltage test method for AC withstand voltage testing of capacitive equipment, the boosting test transformer is bulky and large, and it is difficult to obtain a high current test power supply on site. Compared with traditional testing methods, variable frequency series resonance has the advantages of small input power capacity, light equipment weight, high quality factor, automatic tuning, multiple protections, and flexible combination methods.


Due to the fact that the series resonant power supply generates high voltage and high current through resonance between the resonant reactor and the tested capacitor, the test power supply only needs to provide active power consumption of the system, so its required power supply is only 1/Q of the test capacity. Moreover, since the series resonant test does not require a high-power voltage regulating device and a power frequency test transformer, the resonant excitation power supply only needs 1/Q of the test capacity, greatly reducing the weight and volume of the series resonant system. In addition, the resonant power supply is a resonant filtering circuit that can improve the output voltage waveform, thereby preventing harmonic peaks from causing false breakdown of the test sample. In the series resonance state, when the weak point of the insulation of the test sample is broken down, the circuit immediately loses resonance, and the loop current rapidly drops to 1/Q of the normal test current, so it can also prevent large short-circuit currents from burning the fault point.


High voltage electrical experiments are mainly aimed at inspecting the safety of insulation system equipment in power systems, and at the same time, regular tests should be conducted on electrical equipment during daily operation. AC withstand voltage test is a common experimental method in high-voltage electrical experiments, but it requires high requirements for power supply and equipment. The application of series resonance equipment greatly reduces the difficulty of AC withstand voltage test and enables the test to proceed smoothly. Therefore, it is necessary to analyze and study the application of series resonance in high-voltage testing.


Overview of series resonance


In high-voltage experiments, the application of series resonance is to use an RLC series resonance circuit to generate resonance, so that the current and power supply voltage are in phase, producing the effect of reactive power voltage being the same but opposite in phase, and the entire circuit will exhibit resistance. Among them, the magnitude of the resonant current depends on the size of the resistance, and its resonant frequency is adjusted by the circuit parameters L and C. By adjusting these two parameters, series resonance can be achieved. From this, it can be seen that in order to apply series resonance technology in high-voltage experiments, the first resonant equipment that should be equipped includes two parts, namely reactors and capacitors. Among them, the reactor generates inductance L, while the capacitor generates capacitance C. By adjusting the values of L and C to make the frequency of the external power signal consistent with the fixed frequency of the circuit, resonance will occur in the circuit. When resonance occurs, the voltage value obtained on the capacitor and inductor is the maximum, so that the maximum voltage value can be used to test the test object of the power equipment to achieve the purpose of the test. Specifically, the entire series resonant device mainly includes a variable frequency voltage regulating power supply, an excitation transformer, a high-voltage reactor, and a high-voltage voltage divider. Among them, the variable frequency voltage regulating power supply mainly provides adjustable frequency and amplitude voltage in experiments, with multiple protection functions such as overvoltage protection, discharge protection, and overcurrent protection. The excitation transformer can raise the output voltage of the variable frequency power supply to the required voltage for the test, so that the variable frequency voltage meets the resonance requirements. High voltage divider is used to measure test voltage and protect signals; The elegant reactor is an indispensable component in the resonant circuit and an important tool for generating resonance. When the system frequency matches the power frequency, series resonance occurs.


Compared with the AC power frequency withstand voltage test device, the variable frequency series resonance has the advantages of small power capacity, light weight of the test equipment, good output voltage waveform, and can effectively prevent harmonic peak from causing false breakdown of the test sample, and can avoid large short-circuit current burning the fault point. The principle, engineering application analysis, and field tests of variable frequency series resonance show that it has outstanding technical advantages and good application prospects in power engineering testing.

Send Inquiry

whatsapp

Phone

E-mail

Inquiry