Wuhan UHV specializes in producing series resonance (also known as variable frequency series resonance test device). Next, we will share with you the common faults in series resonance parallel resonance test.
Common faults in series resonance and parallel resonance tests
A large number of enterprises in the industry have various specifications of series resonance test devices to satisfy the market demand, such as lax quality control, hardware and software problems causing varying degrees of failures. Based on user feedback and the phenomena we have observed, Dingsheng Power summarizes the common failures of series resonance test devices in the industry
(1) The reactor is overheating and leaking oil. The reactor plays a role in regulating inductance and increasing voltage in a series resonant system. During operation, the load current causes internal heating, and the reactor will explode and leak oil due to thermal expansion and contraction. The degree of explosion is mild, but it can still be used normally. In severe cases, the reactor winding may be burned out.
(2) Unable to find resonance point. The inability to find a resonance point is not only related to the design, but also to the load capacitance. The specific configuration method depends on the actual product. However, normally, the series parallel resonance device can achieve the self resonance inspection standard by connecting the reactors in series. For some manufacturers' devices that cannot resonate even under no-load, you need to be extra careful. In addition, you also need to carefully check whether the grounding wire is in good contact. The high voltage generated by the series resonance device is relatively high voltage. If the grounding wire is not in good contact, it will also lead to the inability to find the resonance point or floating point voltage.
The above are general faults or common issues in cable series parallel resonance testing. It is important to choose a reputable manufacturer when purchasing. The products you can see are the same, and what you cannot see is unknown. For example, due to price differences, some manufacturers change the winding material to aluminum core or copper plating, which will affect the reliability and stability of the quality.





