How To Determine The Voltage For The AC Withstand Voltage Test?

Sep 02, 2025 Leave a message

Wuhan UHV specializes in producing series resonance (also known as AC withstand voltage test equipment). Next, we will share with you how to determine the AC withstand voltage test voltage?

 

357


AC withstand voltage test is an effective and direct method for evaluating the insulation strength of power equipment, and is an important part of preventive testing.


In addition, due to the fact that the AC withstand voltage test voltage is generally higher than the operating voltage, the equipment has a large safety margin after passing the test. Therefore, AC withstand voltage test is an important means to ensure the safe operation of power equipment. Generally, a variable frequency series resonance test device is used for AC withstand voltage testing.


How to determine the voltage for the AC withstand voltage test?


In the AC withstand voltage test, the key issue is to correctly select the value of the test voltage. On the one hand, it is required to ensure the insulation level, and on the other hand, it is necessary to consider the insulation degradation caused by the high test voltage. Generally, the following factors should be considered.


1. The value, duration, and frequency of overvoltage that may occur on the test sample. If the possibility of the test sample being subjected to high overvoltage is extremely low, it is not necessary to use excessively high test voltage; If the test sample (such as a generator directly connected to an overhead line) may experience high overvoltage, the value of the test voltage should be appropriately increased.


2. The insulation level used in the design of electrical equipment.


3. The condition of equipment insulation. Due to various conditions during operation, the insulation of the equipment gradually deteriorates and the insulation performance decreases. Therefore, when determining the test voltage, the degree of insulation damage and operating years should be considered. For example, the test voltage of the operating equipment should be 75% to 90% of the factory level.

Send Inquiry

whatsapp

Phone

E-mail

Inquiry