With the development of self turn off power electronic devices, series resonant (also known as series resonant devices) inverter circuits have gained more and more applications. Various control methods suitable for series resonant inverter circuits continue to emerge. This article discusses and compares commonly used control methods such as amplitude modulation, pulse frequency modulation, pulse density modulation, and resonant pulse width modulation, and provides a detailed analysis of the control method of pulse width plus frequency modulation.
Basic structure of series resonant inverter
The basic schematic diagram of a series resonant inverter includes a DC voltage source, an inverter bridge composed of switches S1-S4, and a series resonant load composed of R, L, and C. Switches S1-S4 can use power semiconductor devices with self turn off capabilities such as IGBT, SIT, MOSFET, SITH, etc; The inverter is a single-phase full bridge circuit, and its control method is that the driving signals of the two switching devices on the same bridge arm are complementary, and the two diagonally opposite switches are simultaneously turned on and off.
Control method of series resonant inverter
1. Amplitude modulation control (PAM) method
The amplitude modulation control method is achieved by adjusting the output voltage Ud of the DC voltage source (inverter input) (which can be achieved by using a phase-shifting voltage regulation circuit or a filtering circuit composed of a chopper voltage regulation circuit and an inductor and capacitor) to adjust the output power. That is, the output power of the inverter is regulated by the input voltage, and the phase control between current and voltage is completed by a phase-locked loop (PLL) to ensure a large power factor output. The advantage of this method is that the control is simple and easy to implement, but the disadvantage is that the circuit structure is complex and the volume is large.
2. Pulse frequency modulation (PFM) method
The pulse frequency modulation method adjusts the output power by changing the operating frequency of the inverter, thereby changing the load output impedance.





