During the use of the series resonant voltage withstand test device, we will learn about parallel resonant circuits and series resonant circuits. So, what are the characteristics of parallel resonant circuits and series resonant circuits?
Parallel resonance, also known as current resonance, is a parallel circuit of capacitors and inductors in which the size of the capacitors is precisely such that the voltage and current in the circuit are in phase, meaning that the power supply energy is completely consumed by resistors and becomes a resistor circuit. This is called parallel resonance. Series resonance is a series circuit composed of resistors, inductors, and capacitors. When the capacitance reactance XC and inductance reactance XL are consistent, that is, XC=XL, the phase of the voltage u and current i in the circuit are the same, and the circuit exhibits a resistive phenomenon, which is called series resonance.
The above are the basic characteristics of parallel resonance and series resonance. So, what are the characteristics of parallel resonance circuit and series resonance circuit respectively? The following article will explain them in detail.
Characteristics of parallel resonant circuit: When an external frequency is added to a parallel resonant circuit, the first characteristic is that when the external frequency is equal to the resonant frequency, the impedance of the circuit is purely resistive and has a maximum value, which is commonly referred to as a frequency selective circuit in practical applications. Feature 2: When the external frequency is higher than its resonant frequency, its circuit impedance is capacitive and can be considered as a capacitor. Characteristic 3: When the external frequency is lower than its resonant frequency, the circuit exhibits inductance, which is equivalent to an inductive coil. Based on the above characteristics, we know that if the series or parallel circuit is not adjusted at the signal frequency point, the signal passing through this circuit will cause phase distortion.
Characteristics of series resonant circuit: When an external frequency is added to a series resonant circuit, the first characteristic is that when the resonant frequency and the external frequency are equal, the circuit impedance is purely resistive and has a minimum value, which is the notch filter in practical applications. Feature 2: When the external frequency is higher than its resonant frequency, the circuit impedance is inductive, equivalent to an inductive coil. Characteristic 3: When the external frequency is lower than its resonant frequency, the circuit becomes capacitive and can be considered as a capacitor.
The above are the characteristics of series resonant circuits and parallel resonant circuits.
Wuhan UHV specializes in producing series resonance (also known as power frequency withstand voltage test equipment) and has been engaged in the electrical measurement industry for many years. Its products have first-class quality and welcome customers to come and purchase.





