Product introduction
Transformer capacity tester is a professional test instrument used to measure the capacity of power transformers. It is mainly used for daily maintenance, fault diagnosis and equipment selection of power system equipment. The transformer capacity tester applies low-frequency power to the transformer and collects current and voltage signals, and then calculates the capacity of the transformer through internal algorithms.
Product parameters of transformer capacity tester
Product features
High-precision Detection Technology
The transformer capacity tester adopts advanced high-precision detection technology, and ensures the accuracy of test data through high-precision sensors and precise digital signal processing circuits. Its accuracy reaches 0.01%, which can effectively reflect the changes in the actual capacity of the transformer and help users to grasp the operating status of the equipment in a timely manner.
Waterproof And Dustproof Design
The transformer capacity tester adopts a fully enclosed design and has passed the IP67 protection level test. It can work stably in dusty and high-humidity environments, ensuring that the equipment is not damaged in harsh environments. In addition, its internal circuit is sealed with a nano-protective coating, which can form a waterproof and dustproof protective film on the surface of the circuit board, effectively preventing water vapor and dust from invading the circuit and avoiding the impact of humid environments on circuit performance.
Fast Test Speed
The transformer capacity tester has the advantage of fast response, with the average test time shortened to 30 seconds, which is about 40% higher than the test efficiency of traditional equipment, effectively reducing the test cycle and improving operation and maintenance efficiency. The efficient test speed is particularly suitable for industrial scenarios that require fast detection and continuous operation, allowing users to complete the capacity detection tasks of a large number of devices in a short time.
Easy To Operate
The transformer capacity tester supports one-touch start-up and auto-detection capabilities, allowing operators to start testing with just the press of a button, eliminating the need for complex setup steps. At the same time, the simple prompt information and guidance functions included in the interface can help users quickly understand the operation process. Even people without professional background can master the usage method in a short time, thus significantly improving work efficiency and reducing training costs.
Common application scenarios of transformer capacity tester
1. Factory inspection of transformers
Ensure product quality: Before the transformer leaves the factory, conduct no-load characteristic testing to ensure that its various indicators meet the design requirements and relevant standards, and ensure product quality.
Provide performance data: Test data can serve as evidence of transformer performance, providing users with reliable data references.
2. Operation and maintenance of transformers
Monitoring equipment status: Regularly conduct no-load characteristic tests on transformers in operation, monitor their performance changes, and promptly identify potential fault hazards.
Assessing the degree of aging: By comparing test data from different periods, the degree of aging of transformers can be evaluated, providing a basis for developing maintenance plans.
Verify design parameters: Compare the test results with the design parameters to verify whether the actual performance of the transformer matches the design.
3. Fault diagnosis
Identifying the cause of the fault: When an abnormality occurs in the transformer, the no-load characteristic test can be used to analyze the cause of the fault and determine whether it is caused by iron core problems, winding problems, or other factors.
Assess the impact of faults: Evaluate the impact of faults on transformer performance and provide decision-making basis for maintenance.
4. Technical appraisal
Identification of Transformer Model: Based on the test results, the model and capacity of the transformer can be identified.
Evaluate transformer performance: Conduct performance evaluation on second-hand transformers or modified transformers to determine whether they meet the requirements for use.
5. Scientific research experiments
Research on Transformer Characteristics: In the process of transformer design, manufacturing, and research, no-load characteristic testing is a commonly used experimental method.
Validate theoretical model: Compare the test results with the theoretical model to verify the accuracy of the model.
FAQ
1. What are the main parameters tested by the transformer capacity and no-load load tester?
The rated capacity, no-load loss, no-load current, load loss, impedance voltage, power factor, voltage, current, and frequency parameters of the transformer can be tested. The specific testing items vary depending on the instrument model and configuration.
2. Is the transformer capacity tester suitable for on-site use?
fit. Adopting an integrated design that integrates measurement, data processing, display, and storage functions, it is suitable for substations, distribution rooms, transformer production workshops, and power maintenance sites.
3. Is the operation of the tester complicated?
The operation process is relatively simple. After completing the testing wiring and setting the testing parameters, the measurement can be started, and the instrument can automatically collect data and calculate the relevant results. Specific operations should be carried out in accordance with the product manual and safety operating procedures.
4. Does the transformer capacity tester support automatic measurement?
Yes. The automatic measurement function can reduce manual operation and calculation, improve testing efficiency, and reduce the impact of human operation errors on test results.
5. Is the transformer capacity tester suitable for transformer manufacturers?
Applicable. Transformer manufacturing enterprises can use it for product factory testing, quality control, performance testing, and product validation during the production process.
6. Is the transformer capacity tester suitable for power companies and substations?
Applicable. Power supply companies, substations, and power installation and maintenance units can use this equipment for on-site inspection, equipment acceptance, and operation maintenance of transformers.
7. Do you provide technical support?
We can provide equipment selection, technical consultation, operation training, on-site testing guidance, and after-sales technical support to help customers use equipment correctly.
8. How to choose the appropriate transformer capacity and no-load load tester?
The selection should be based on the type of transformer being tested, maximum capacity, rated voltage, current range, testing items, accuracy requirements, and on-site usage environment. If export procurement is required, the power specifications, language, data interfaces, and local standard requirements should also be confirmed.
We are a professional transformer capacity tester manufacturers in China.We can provide the best professional transformer capacity tester for sales and competitive price. If you are looking for transformer capacity tester supplier, we are a good choice.
Contact us to get transformer capacity tester price.
Hot Tags: transformer capacity tester, China transformer capacity tester manufacturers, suppliers, factory, Portable Ground Resistance & Resistivity Tester