Product introduction
UHV lightning impulse voltage generator is a core equipment in high-voltage electrical testing, specifically designed to simulate high amplitude, short rise time impulse voltage waveforms generated by natural lightning strikes in laboratory environments. It is mainly used to test the insulation performance and tolerance of power equipment (such as transformers, insulators, lightning arresters, cables, gas insulated switchgear, etc.) when subjected to lightning overvoltage.

Product Parameters
| Charging voltage | Setting range | 0 ~ 100kV |
| Scope of work | 10.0~100.0kV | |
| Setting deviation | ≤±1% | |
| Instability degree | ≤±1% | |
| Setting resolution | 0.1kV | |
| Charging time | Setting range | 30~180s |
| Setting resolution | 1s | |
| Alarm delay | 2s | |
| Number of pressure | Setting range | 1~999 |
| Protection setting | Overcurrent protection value | configurable |
| Overvoltage protection value | configurable | |
| Dynamic charge protection | Can be Selected | |
| Output impact stability | Greater than 99% | |
| Number of voltage boosting | setting range | 1~999 |
Core functions and classification of lightning impulse voltage generator
The lightning impulse voltage generator is mainly used to generate standard lightning impulse full waves, cut waves, and operational impulse voltage waves to assess the insulation performance of electrical equipment. Its core is to achieve parallel charging and series discharging of energy storage capacitors through multi-level Marx circuits, thereby generating the required high amplitude, short duration voltage pulses on the test sample.
According to different application focuses, it can usually be divided into the following dimensions:
According to the experimental waveform, it can be divided into a standard lightning impulse full wave generator and a lightning impulse cutoff generator. The latter is used to simulate the working conditions where lightning waves are intercepted due to faults during propagation.
According to deployment methods: mainly divided into fixed and movable. Fixed equipment is typically used in laboratory environments, emphasizing long-term stability and precise adjustable waveform parameters; Mobile (or modular design) emphasizes convenient transportation and rapid deployment capabilities, suitable for on-site testing scenarios such as substations.
According to system integration, it can be divided into basic and highly automated types. The latter integrates automatic charging, triggering, waveform acquisition, data analysis, and report generation functions, which can significantly improve the efficiency of experiments and the standardization of data management.
Application areas of lightning impulse voltage generator
Insulation coordination of power equipment: Ensure the safe operation of generators, transformers, high-voltage cables, GIS equipment, etc. under transient overvoltage.
Product development and certification: Newly developed power equipment requires strict impulse voltage testing to obtain certification.
Power grid security protection: Evaluate the tolerance of power grid equipment to develop effective lightning protection measures.
Typical application cases
Grid equipment network access testing: A provincial-level power science research institute used this equipment to conduct routine insulation impulse withstand voltage tests on a batch of newly purchased 110kV power transformers, ensuring the safety and quality of the equipment before it was put into operation.
Quality control of high-voltage cable manufacturers: A well-known cable production enterprise used a lightning impulse voltage generator to test the insulation shielding layer of high-voltage cross-linked polyethylene cables during factory testing, effectively identifying potential defects.
Research on Insulation Materials in Universities: A laboratory of the School of Electrical Engineering at a key university in China used this equipment to simulate lightning strikes of different intensities and study the voltage resistance characteristics and aging mechanism of new composite insulation materials.
Performance evaluation of lightning protection equipment: A lightning protection device manufacturer uses a lightning impulse voltage generator to accurately measure the protection level (residual voltage) and operating characteristics of lightning arresters in their research and development center, in order to optimize product design.
Purchase suggestions of Lightning Impulse Voltage Generator
1. Clarify the core experimental requirements: Firstly, confirm the type of test sample, maximum test voltage, equivalent capacitance (determining the required output energy), and the specific parameters of the test standards that must be performed (such as full wave and cutoff wave). This is the fundamental basis for selecting the basic configuration of the device body and necessary accessories.
2. Focusing on waveform quality and measurement system: The core value of impact testing lies in the accuracy and repeatability of waveform parameters. Attention should be paid to the convenience of waveform adjustment, voltage utilization coefficient (usually not less than 85% for lightning waves), and synchronous triggering reliability of the equipment under typical loads. At the same time, the overall accuracy and anti-interference ability of the supporting measurement system (voltage divider, digital recorder) are equally critical.
3. Consider scalability and operational convenience: Consider whether the laboratory has plans to upgrade voltage or energy in the future. Modular design of equipment facilitates later expansion by increasing the number of stages. In addition, it is necessary to evaluate the maintenance convenience of the overall structure of the equipment, as well as the expected lifespan and replacement cost of core components such as pulse capacitors and switches.
4. Evaluate the experience and technical services of manufacturers: Prioritize consulting with manufacturers who have similar successful cases in your industry and scale. Gain a deep understanding of how its technical team solves specific engineering problems such as waveform adjustment and on-site electromagnetic compatibility, and clarify its after-sales technical support system, including installation and commissioning, technical training, spare parts supply, and emergency response mechanisms. For users with on-site testing needs, the manufacturer's on-site deployment and technical support experience are particularly important.
FAQS
What voltage levels are available for your Lightning Impulse Voltage Generator?
As a professional manufacturer of high-voltage testing equipment, UHV offers Lightning Impulse Test Systems ranging from several hundred kilovolts up to multi-megavolt levels. The system can be configured according to your testing requirements and the characteristics of the test object.
Our systems are widely used for testing:
Power transformers
Distribution transformers
GIS switchgear
Current transformers (CTs)
Voltage transformers (PTs)
Surge arresters
Insulators
Power cables
Research and testing laboratories
For EHV and UHV applications, we provide complete turnkey impulse testing solutions.
Can the lightning impulse voltage generator generate both lightning impulse and switching impulse waveforms?
Yes.
Our Lightning Impulse Test Systems can generate a full range of standard impulse waveforms, including:
Standard lightning impulse wave (1.2/50μs)
Full-wave impulse
Front-chopped impulse
Tail-chopped impulse
Switching impulse wave (250/2500μs)
All waveforms are generated in accordance with IEC 60060 and IEEE requirements.
Does the lightning impulse voltage generator comply with international standards?
Absolutely.
UHV systems are designed and manufactured in compliance with:
IEC 60060-1
IEC 60060-2
IEC 61083
IEEE Std 4
Applicable GB/T standards
They are suitable for routine tests, type tests, and research applications.
QHow accurate is the impulse waveform?
Waveform accuracy is one of the key performance indicators of any impulse test system.
To ensure stable and accurate performance, UHV systems use:
Precision wave-shaping resistors
High-stability impulse capacitors
Digital triggering technology
Optimized low-inductance circuit design
This allows precise control of peak voltage, front time, and tail time while maintaining excellent waveform consistency and repeatability.
What measuring equipment is included with the lightning impulse voltage generator?
UHV provides a complete digital impulse measurement package, including:
High-voltage divider
Digital impulse recorder
Data acquisition unit
Waveform analysis software
Calibration accessories
The lightning impulse voltage test system automatically captures, measures, and analyzes impulse waveforms.






We are a professional lightning impulse voltage generator manufacturers in China.We can provide the best professional lightning impulse voltage generator for sales and competitive price. If you are looking for lightning impulse voltage generator supplier, we are a good choice.
Contact us to get lightning impulse voltage generator price.
Hot Tags: lightning impulse voltage generator, China lightning impulse voltage generator manufacturers, suppliers, factory, hipot tester HVX series, high voltage tester 15kv, IEC 61010 2 034 compliant hipot tester, high voltage dielectric tester for cable production, hipot tester with external HV scanner, hv test kit














