video
Circuit Breaker Dynamic Characteristic Analyzer

Circuit Breaker Dynamic Characteristic Analyzer

The UHV-406 Circuit Breaker Dynamic Characteristic Analyzer can simultaneously measure 12 metal contact fracture surfaces, 6 closing resistances, 3 graphite contact tests, and 3 double ended grounding

Product Introduction
Product Introduction

 

Circuit Breaker Dynamic Characteristic Analyzer (double ended grounding) is a specialized instrument that uses double ended grounding isolation and voltage division technology to safely and accurately measure key mechanical and electrical characteristics such as circuit breaker opening and closing time, speed, stroke, synchronicity, coil current, etc., while ensuring reliable grounding on both sides of the high-voltage circuit breaker fracture. It is an indispensable safe and efficient testing tool for circuit breaker status maintenance and fault diagnosis in modern power systems, especially in operating substations. The design of its "dual terminal grounding" is the core that distinguishes it from conventional dynamic characteristic testers, and it is also a key guarantee for its safe operation in live or near live environments.

product-1500-978
product-1500-978

 

Technical Parameters

 

Coil current Maximum current 20A, resolution: 0.01A
Coil resistance measurement range 0 ~ 2000Ω, resolution: 0.01Ω
Instrument power supply AC220V ± 10%; 50Hz ± 10%
Dc power output DC6 ~ 270V continuous adjustable, DC24V≤15A (short time), DC220V≤ 20A(short time)
External trigger voltage 10.AC/DC10-300V, current ≤120A
Isolation switch measurement range (1) Voltage output: DC6~270V(adjustable)
(2) Power output time: 0.01-20 seconds (configurable)
(3) The maximum acquisition time of the fracture signal is 200 seconds
(4) Can measure fracture closing, opening time, three-phase different periods, bounce time and number
Mainframe volume 400×263×175mm
Use environment -20℃~+50℃
Relative humidity ≤90%

 

Core functions of Circuit Breaker Dynamic Characteristic Analyzer

 

Measure various time parameters of circuit breakers during opening and closing operations, such as opening/closing time, three-phase periodicity (different time periods), bounce time, metal short-circuit time, etc.

Measure the stroke characteristics of circuit breakers during operation, such as opening/closing speed (average speed, just opening/closing speed), overtravel, opening distance, contact stroke (overtravel), etc.

Measure the current waveform of the circuit breaker operating coil: opening coil current, closing coil current. This helps to determine whether the electromagnet is operating normally, whether there is any jamming, and the switching time of auxiliary contacts.

Measurement of dynamic resistance between fracture surfaces (some advanced models): Measure the change in contact resistance of the main contact during the opening or closing process to evaluate contact wear and contact quality.

 

Main advantages of Circuit Breaker Dynamic Characteristic Analyzer

 

Intrinsic safety: It is the only method that allows for dynamic characteristic testing in environments where the circuit breaker may be energized (such as induced electricity) or in close proximity to energized equipment, greatly ensuring the safety of personnel and equipment.

Wide testing range: not limited by on-site grounding methods, especially suitable for testing GIS (gas insulated switchgear), HGIS (composite electrical equipment), tank circuit breakers, and conventional open circuit breakers in operating substations.

Strong anti-interference ability: The dual terminal grounding and isolated voltage divider design can effectively suppress on-site electromagnetic interference.

Convenient wiring: Usually, only the two high-voltage terminals of the voltage divider (usually with long insulation rods) need to be reliably connected to the grounding bars or grounding piles on both sides of the fracture, without changing the original grounding state of the circuit breaker (especially the busbar side grounding).

 

Typical application scenarios


This circuit breaker dynamic characteristic analyzer mainly serves the key quality control links throughout the entire life cycle of circuit breakers, including:
Acceptance before commissioning after new installation or renovation: Before the equipment is officially connected to the grid, a comprehensive mechanical characteristic verification is carried out to confirm that its performance meets the technical requirements of the factory.
Regular preventive tests during operation: Conduct routine inspections on in use circuit breakers according to the prescribed cycles in the power industry, and timely detect potential defects such as mechanism jamming and wear through vertical data comparison.
Post fault diagnostic testing: After a circuit breaker experiences refusal, misoperation, or disconnection faults, its mechanical performance is evaluated through testing to determine if it has deteriorated, providing a basis for fault attribution analysis and maintenance strategy formulation.
This circuit breaker analyzer is suitable for vacuum, SF ₆, GIS combination electrical appliances, as well as various types of high-voltage circuit breakers such as low oil and high oil.

 

product-1500-978
product-1500-978
product-1500-978
product-1500-978
product-1500-978
product-1500-978
product-1500-978
product-1500-978
product-1500-978
product-1500-978
product-1500-978
product-1500-978
product-1500-978
 

How many contacts can be tested simultaneously?

UHV circuit breaker dynamic characteristic analyzer supports:

12 fracture channels

6 main contacts

6 auxiliary contacts

All channels are acquired simultaneously for accurate synchronization analysis.

 

What is the unique advantage of UHV Circuit Breaker Tester?

The most distinctive feature is the Dual-End Grounding Test Technology.

Benefits include:

No need to disconnect grounding switches

Improved operator safety

Reduced risk of induced voltage

Suitable for GIS substations

Suitable for compact substations

Suitable for old substations with special grounding requirements

This technology significantly improves field testing safety and efficiency.

 

Does the device support opening and closing speed measurement?

Yes. The device can measure the circuit breaker's opening speed, closing speed, and average speed within a specified travel interval. By analyzing data such as speed and travel, maintenance personnel can determine whether the mechanism operates normally and assist in identifying issues such as mechanical wear or motion obstruction.

 

What is the time measurement accuracy?

Time measurement specifications:

Resolution: 0.01 ms

Accuracy: ±0.05% ±0.1 ms

This enables precise evaluation of circuit breaker mechanical performance.
 

What types of circuit breakers can this device test?

This device is suitable for various high-voltage circuit breakers, including vacuum circuit breakers, SF₆ circuit breakers, GIS switchgear, and oil circuit breakers. The specific applicable scope should be confirmed based on the circuit breaker structure, rated parameters, and instrument configuration.

 

Are you a manufacturer or trading company?

UHV is a professional OEM manufacturer specializing in high-voltage electrical testing equipment.

Main products include:

Circuit Breaker Testers

Relay Test Sets

Transformer Testers

Resonant Test Systems

Cable Test Equipment

Partial Discharge Test Equipment

The company integrates R&D, manufacturing, sales and technical service.

 

What certifications do you have?

UHV has obtained:

ISO 9000 Quality Management System Certification

CE Certification

The company has also been recognized as an Advanced Science and Technology Enterprise.

 

We are a professional circuit breaker dynamic characteristic analyzer manufacturers in China.We can provide the best professional circuit breaker dynamic characteristic analyzer for sales and competitive price. If you are looking for circuit breaker dynamic characteristic analyzer supplier, we are a good choice.


Contact us to get circuit breaker tester price.

 

Hot Tags: circuit breaker dynamic characteristic analyzer, China circuit breaker dynamic characteristic analyzer manufacturers, suppliers, factory, breaker contact resistance analyzer for inspection agencies, circuit breaker test equipment for utilities, circuit breaker test set, CBM analyzer, circuit breaker analyzer price, CB resistance checking device

Send Inquiry

whatsapp

Phone

E-mail

Inquiry

Bag