Product introduction
The three-phase high current temperature rise device adopts imported high magnetic conductivity materials, with exquisite design, small size, strong resistance to electric power, and convenient use. This series of high current generators is a necessary equipment for various industries that require high current places in electrical debugging. They are used in power plants, substations, electrical manufacturing plants, scientific research, laboratories and other units, and belong to short-term or intermittent working systems. Suitable for current load testing and temperature rise testing of 50Hz switches, current transformers, and other electrical equipment.
This series of fully automatic temperature rise test devices consists of two parts: the control panel and the current regulator. They have the characteristics of stepless adjustment of output current, stable current rise, large load variation range, reliable operation, and easy and safe operation. They can also be used as current source equipment for current or temperature rise tests in industrial and mining enterprises.

Product Parameters
Use Condition
| Use power supply | Voltage: AC380V±10% |
| Frequency | 50Hz±2%Hz |
| Environmental temperature | -10℃~40℃ |
| Relative humidity | ≤80% |
| Safety performance | Insulation resistance: 20MΩ |
| Rated total capacity | 40kVA |
| Output current | AC 0-1000A |
| Protection level | IP20 |
| External structure | Integrated temperature rise |
Equipment parameters and functions
| Input voltage | AC380V±10% 50Hz±2% three-phase four wire |
| Rated total capacity | 40kVA |
| Output current | Three phase AC 0-1000A panel with digital display ammeter and voltmeter |
| Output waveform | The output current is a standard sine wave with minimal spikes, better than the required specifications of the power system, and a ripple factor of less than 0.3%. Sinusoidal waveform |
| Current accuracy level | ±(2% x reading + 1% x range) |
| Voltage accuracy level | ±(2% x reading + 1% x range) |
| Load effect | ≤1% rated value(only used for the output voltage change rate caused by the change of output current from zero to rated value) |
| Output current mode | True effective value continuously adjustable |
| External structure | Integrated |
| Protection settings | Overcurrent and overvoltage(primary with overcurrent protection) |
| Protection settings | 10 hours |
Temperature Inspection Device
| Basic accuracy | 0-1000℃: ±(reading value x 0.5% +1)℃, -100~0℃:±(reading value x 0.5% +2)℃ |
| Measurement range | -250℃~2400℃ |
| Resolution | 0.1℃ |
| 7-inch LCD display technology, English display interface. | |
| The isolation channel voltage should not exceed 100V, otherwise the instrument will be damaged | |
| Storage time interval 1S~99H | |
| Parameters can be set to measure any of 1-24 channels | |
| Matching different thermocouples to meet different temperature measurement ranges | |
| Large screen display, various temperature parameters(all temperature values displayed and one temperature alarm channel) and measurements | |
| All set parameters will be powered off and maintained for 5 days; Equipped with fixed-point and inspection functions | |
| The testing channel can be set arbitrarily to meet the requirements and speed of measurement | |
| Recording: The recording interval can be set(with a recording interval of no less than 1 second), and can record 8000 sets of data. The longer the recording interval, the longer the total recording time | |
| Real time curve display function, capable of displaying real-time curves for the past 30 hours | |
Product featuress of Fully Automatic Temperature Rise Test Device
1. Intuitive reading: This fully automatic temperature rise test device adopts a digital meter head that can directly display the test values of current and voltage, which is convenient for experimental observation and recording.
2. Accurate measurement: It has high measurement accuracy and accurate test values.
3. Accurate protection function: Fully digitized processing, the setting of overcurrent protection values and timing current are all implemented digitally, making protection more accurate.
4. Operation mode: manual/automatic.
5. The switch from the power supply to the input of the voltage regulator, and the switch from the output of the voltage regulator to the input of the current regulator, namely the front stage closed and the rear stage closed; Corresponding to the post score and pre score; Emergency stop; Mutual locking.
6. Equipped with zero position locking function of voltage regulator
7. The transformer is equipped with secondary open circuit overvoltage protection, which can prevent the signal line from tripping and causing high voltage in the secondary open circuit of the current transformer
8. The use of special structures can effectively control the eddy current heating problem of the lift body bracket and shell metal
9. The upper surface of the casing of the riser body is equipped with 4 lifting rings for easy lifting, and the bottom is equipped with wheels for easy movement
10. The instrument adopts a 160 * 80 large digital display, which is convenient for remote monitoring of power supply voltage and current, voltage and current output by the regulator, and output voltage and current of the booster
11. With power-off protection function, in case of sudden power loss during current rise test, the voltage regulator motor will automatically reset to zero position (with zero position indication) after re energization (after the manual closing air switch on the control cabinet panel is closed)
12. Fully automatic temperature inspection instrument, real-time recording of temperature and temperature curve
Application scenariosof Fully Automatic Temperature Rise Test Device

1. Factory inspection and type testing of electrical manufacturers
In the electrical manufacturing process, temperature rise test is the core project to assess the compliance of product heat dissipation design. This device is widely used for temperature rise assessment of products such as switchgear, bus ducts, transformers, cables, etc.
2. Handover test and preventive test between power plant and substation
In new construction or expansion projects, this device is used for handover testing to evaluate the contact reliability and heat dissipation performance of the equipment after on-site installation. In addition, after a certain period of equipment operation, preventive tests can be conducted to identify abnormal heating defects caused by aging, loosening, or corrosion, providing data support for condition based maintenance.
3. Research and development verification and quality supervision of research institutes and quality inspection institutions
The research institute uses this device to carry out research and development verification of new electrical equipment and evaluation of material heat resistance performance; Third party quality inspection agencies use it for product quality supervision and testing. Through controllable high current loading, researchers can accurately obtain thermal characteristic curves under different operating conditions, providing experimental basis for product optimization design.
4. Fault analysis and diagnosis
When the on-site equipment experiences abnormalities such as overcurrent and overheating, the faulty equipment can be moved to the laboratory and the device can be used to reproduce the faulty operating conditions. By comparing the temperature rise data under normal and abnormal conditions, it assists in locating the cause of accidents and provides technical support for fault rectification and responsibility determination.
5. Special applications in the fields of rail transit and new energy
In the field of rail transit, this device is used for temperature rise calibration of subway and railway power supply equipment. In the field of new energy, it is used for temperature rise testing of electric vehicle charging guns and charging connection devices.



We are a professional fully automatic temperature rise test device manufacturer in China.We can provide the best professional fully automatic temperature rise test device for sales and competitive price. If you are looking for fully automatic temperature rise test device supplier, we are a good choice.
Contact us to get fully automatic temperature rise test device price.
Hot Tags: fully automatic temperature rise test device, China fully automatic temperature rise test device manufacturers, suppliers, factory














