Product introduction
Widely used in the installation and maintenance of various large transformer equipment, wind power generation, thermal power generation, power supply bureaus, etc., for oil purification and vacuum hot oil circulation drying. For the purification of insulating oil in transformers of 35KV-110KV-220KV, vacuum drying can be performed simultaneously with filtration. The dual-stage vacuum oil filter requires a dehydration and degassing system to quickly remove moisture, gases, and harmful components such as light hydrocarbons from the oil. It features a precision filtration system with multi-stage, progressively more refined filtration to effectively remove mechanical impurities from the oil; an electric heating constant temperature automatic control system ensures rapid oil heating and eliminates "dead oil zones." It guarantees uniform oil heating and stable oil temperature; it also has vacuum pumping and vacuum oil injection functions, and can perform ultimate vacuum extraction for transformers and GIS electrical equipment. Therefore, it meets various on-site requirements.

Working principle and process of Transformer Oil Double-stage Vacuum Oil Filter

After the treated oil passes through the magnetic filter, it enters the thick filter heater for heating. The heated oil passes through the second-stage filter from the oil suction pump to the spiral spray atomization system. The insulated oil becomes coarse-grained fog and falls on the reaction tower and enters the vacuum separation chamber. The moisture begins to evaporate. The oil mist, a multi-dimensional evaporation structure formed in the tank can achieve the purpose of purification through a short cycle. Oil products that have been removed from impurities, dehydrated, degasified and acid are completed through a precision filter under the action of the oil exhaust pump. The water vapor hot air separated from the vacuum separation chamber enters the inspector. Most of the water vapor condenses into the water tank. Outside the discharge machine, the hot air in the oil is discharged by a vacuum pump after cooling.
Product Parameters
Technical parameters
|
Name |
Unit |
Spec |
|
Model |
|
SY/ZD-RM-150 |
|
Volume of flow |
L/min |
150 |
|
L/H |
8000-10000(Variable frequency adjustable) |
|
|
Temperature control range |
℃ |
0∽100 |
|
Working temperature |
℃ |
20∽60 |
|
Extreme vacuum |
pa |
≤20 |
|
Working vacuum degree |
Mpa |
-0.06∽-0.099 |
|
Gas content in oil |
% |
≤0.1 |
|
Work pressure |
Mpa |
≤0.5 |
|
Filtration accuracy |
µm |
≤1 |
|
Water content in oil |
ppm |
≤3 |
|
Oil breakdown voltage |
KV |
≥65 |
|
Heating power |
KW |
72 |
|
Total power |
KW |
80 |
|
Power supply |
|
Three-phase five-wire system 380V 50HZ |
|
Inlet/outlet pipe diameter |
mm |
50 |
|
Continuous working hours |
H |
≥800 |
|
Trouble-free working hours |
H |
≥8600 |
Oil quality indicators after insulating oil treatment
|
Performance project |
Unit |
Post-processing indicators |
Test method |
|
1.Moisture content |
% |
无 |
GB/T511 |
|
2.Moisture content |
PPM |
≤3 |
GB/T7600 |
|
3.Pressure resistance value |
KV |
≥65KV |
GB, DL or IEC standards |
|
4.Residual gas |
≤1% |
≤0.5 |
Gas content measurement methods shall be in accordance with relevant GB, DL or IEC standards. |
|
5.Acid value |
1µm |
||
Function of Two-Stage Vacuum Oil Filter
The whole machine process mechanism and vacuum oil filter should have the functions of high-efficiency dehydration, degassing, filtration and drying transformer oil. The main components are: oil inlet pump, coarse filter, oil exhaust pump, degassing tank, heater, polymer purifier, magnetic filter, vacuum pumping system, constant temperature control and automatic oil temperature control system, electrical control cabinet, etc. The quality of the steel frame and other equipment should be intact and non-destructive, and the connection should not be loose. There are no welding tumors, burrs or rust spots at the welding part. The surface of the product adopts a plastic spraying process, and the surface should be smooth and bright. The machine should have the functions of filtration, purification and regeneration, which can efficiently remove moisture, gas and mechanical impurities in the insulating oil.










FAQ
Q1: Is your company a sales company or a manufacturer?
A1: Wuhan UHV Power Technology Co.,Ltd.is an industrial and trade enterprise, with its own factory, self-produced and self-sold. We were founded in 2004 and havetwenty-two years of production experience. Our company has reliable production lines, test rooms and R&D centers.
Q2. Is the quality guaranteed?
A2: In order to ensure quality, we use imported components in large quantities. After three times of quality inspection, the goods can be sent out, and the export is uniformly packed in non-fumigation wooden boxes.
Q3. What are the after-sales terms?
A3: We offer free consulting service, one year warranty, and adopt various methods such as email communication, video calls, technology door-to-door, aiming to solve any after-sales problems in a timely manner.
Q4. What are the cooperative countries or regions?
A4: Products have been successfully exported to the United States, Brazil, Australia, Russia, the Netherlands, Indonesia, Bangladesh, Iran, India, Saudi Arabia, Mongolia, Japan and other countries and regions. In the United States, India, Vietnam and other regions have cooperative distributors, can provide thoughtful services.
We are a professional Transformer Oil Double-stage Vacuum Oil Filter manufacturer in China. If you are looking for Transformer Oil Double-stage Vacuum Oil Filter supplier, we are a good choice.
Contact us to get Transformer Oil Double-stage Vacuum Oil Filter price.
Hot Tags: transformer oil double-stage vacuum oil filter, China transformer oil double-stage vacuum oil filter manufacturers, suppliers, factory















