Product introduction
The Closed Flash Point Analyzer has the advantages of accurate measurement, good repeatability, stable performance, and simple operation. Widely used in departments such as power, petroleum, chemical, commercial inspection, and scientific research, it is an ideal instrument for conducting open flash point testing in departments such as petroleum, chemical, power, environmental protection, railway, and scientific research.



Product Advantages
High Accuracy and Repeatability: The closed cup flash point tester manufacturer provides accurate measurement with repeatability conforming to ASTM D93 and GB/T 261-2008 standards. The repeatability is >110℃±2℃ and ≤110℃±1℃.
Full Automation: The automatic ignition, display, locking, printing, and cooling functions greatly improve testing efficiency and reduce operator workload.
User-Friendly Interface: The ARM microprocessor technology, color LCD, resistive touch screen, and English menu make the instrument easy to operate and interact with.
Reliable Performance: The automatic closed cup flash point tester has stable and reliable performance, with a simple operation process. The built-in clock chip and power-down storage ensure data integrity.
Wide Applicability: It meets the requirements of ASTM D93 and GB/T 261-2008 standard methods, making it suitable for a broad range of industries including power, petroleum, chemical, and commodity inspection.
Application Scenarios
Petroleum Refining and Fuel Quality Control: Essential for testing gasoline, diesel, and lubricants to ensure they meet safety and quality specifications.
Chemical and Solvent Manufacturing: Determines flash points of paints, coatings, adhesives, and industrial solvents, helping classify flammability for safe handling and storage.
Hazardous Materials Classification and Transport: Provides critical data for labeling and shipping flammable liquids in compliance with international transport regulations.
Regulatory and Third-Party Testing Labs: Widely used by inspection authorities and certification bodies to verify product compliance with national and international standards.
Biofuel and Alternative Energy: Used for testing biodiesel and other alternative fuels to ensure they meet safety and performance standards.


technical parameters
| Display | Color LCD display |
| Operating mode | Touch Screen |
| Measuring range | Room temperature~350 ℃ |
| Temperature detection | platinum |
| Repeatability | >110℃±2℃ ; ≤110℃±1℃ |
| Ignition method | electric ignition |
| Information storage | Can store 1000 analysis results |
| Cooling method | Forced air cooling |
| Printer | Thermal printer |
| Repeatability | Comply with ASTM, D93, GB/T 261 standards |
| Power supply | alternating current 220V±11V,50Hz±2.5Hz |
| Power | ≤350VA |
| Operating ambient temperature | 10 ℃~35 ℃ |
| Operating environment humidity | ≤85% |
Details








Test process
1. When the sample temperature exceeds the preset temperature by 30 ℃ and no flash occurs, the closed flash point tester supplier will automatically stop working. This indicates that the print display is "low". The preset flash point can be adjusted to a higher value before conducting the test.
2. When the print shows' high ', it indicates that the flash point setting is too high, and the flash point value should be lowered before conducting the test.
3. When the parameter input is incorrect, the closed flash point tester alarms and does not work.
4. The gas regulating valve should be adjusted gently and forcefully.
5. The distance between the gas cylinder and the closed flash point tester should not be less than 1.2 meters.
6. The sample should be placed in the sample cup according to the scale line.
7. When replacing the sample, the oil cup should be cleaned and dried, and the mixer and temperature sensor should also be wiped clean.
8. Due to the use of an electric heating sleeve for the closed flash point tester, please ground it for safety reasons.
Looking for a reliable Closed Flash Point Analyzer manufacturer and supplier? UHV provides professional flash point testing equipment for transformer oil, lubricating oil, fuel, and other petroleum products. Contact us today to learn more about product specifications, customization options, and the latest Closed Flash Point Analyzer price. Our team is ready to help you find the right testing solution for your laboratory and industrial applications.
Hot Tags: closed flash point analyzer, China closed flash point analyzer manufacturers, suppliers, factory, Transformer oil field test kit, automated flash point tester, closed cup flash tester, Transformer oil quality control test kit, dga in transformer oil, dissolved gases in transformer oil














